Adsorción de Cr(VI) por Cocos nucífera L. en residuales de Fibrocemento en Santiago de Cuba / Cr(VI) adsorption by Cocos nucífera L. in wastewater of fibrocement from Santiago de Cuba

La adsorción y/o formación de complejos de metales pesados basados en la actividad química de la biomasa, es el proceso conocido como biosorción y es la base de una nueva tecnología para su remoción en efluentes industriales y su posterior recuperación. En esta tecnología se pueden utilizar diferentes tipos de biomasas tales como: algas, microorganismos y sub-productos agrícolas. Este trabajo estudió la adsorción de Cr(VI) utilizando la cáscara del fruto de la planta Cocos nucífera L. como biomasa orgánica. Los valores óptimos de adsorción de Cr(VI) son: pH de 3 unidades; tamaño de partícula menor que 0,074 mm; dosis de adsorbente de 5 g.dm-3 y tiempo contacto de 1 hora. A valores bajos de concentración del metal (1,0; 1,5 y 1,84 mg.dm-3) se obtuvo porcentaje de remoción superiores a 90, sin embargo a altos valores de concentración (2,5 y 3 mg.dm-3), se obtienen valores inferiores al 90 %. El proceso pudo ser estudiado a través de los modelos de Langmuir y de Freundlich, ya que el coeficiente de correlación para ambos modelos fue de 0,994 y 0,991 respectivamente. Se logra remover los iones Cr(VI) a valores de pH de 3 y 7 unidades en una matriz real, alcanzando valores de remoción de 96,85 % y 93,71 % respectivamente.

Adsorption and/or formation of complexes of heavy metals based on the chemical activity of the biomass, it is the process known as biosorption and it is the base of a new technology for its removal in industrials effluent and its posterior recuperation. In this technology, different kinds of biomasses can be utilized such as: algae, microorganisms and agricultural subproducts. In this work, the adsorption of Cr(VI) was studied utilizing the nutshell of the fruit of the plant Cocos nucífera L as organic biomass. The optimal values of adsorption of Cr(VI) are: pH of 3 units, size of particle smaller than 0.074 mm, doses of adsorbent of 5 g.dm-3 and contact time of 1 hour. At low values of concentration of the metal (1.0, 1,5 and 1.84 mg.dm-3) percentage of removal superior to 90% were obtained, however, at high values of concentration (2.5 and 3 mg.dm-3) values inferior to 90 % are obtained. The process can be studied by the models of both, Langmuir and of Freundlich, because the , coefficient of correlation for these two models was 0.994 and 0.991 respectively. The ions Cr(VI) can be removed at values of 3 and 7 units in a real matrix, reaching removal values of 96.85% and 93.71% respectively.

Riesgo químico en el Laboratorio de Análisis del Centro de Estudios de Biotecnología Industrial / Chemical risk in the analysis laboratory of the Industrial Biotechnology Studies Center

Se llevó a cabo un ensayo clínico para evaluar el riesgo químico en el laboratorio de análisis del Centro de Estudios de Biotecnología Industrial de la Facultad de Ciencias Naturales de la Universidad de Oriente, con vista a lo cual se identificaron, entre otros aspectos, las características generales del local y de las 20 técnicas establecidas para el análisis de aguas residuales y residuales agroindustriales (11 de estas se aplican 200 veces al año como promedio), frecuencia de los análisis, reactivos químicos empleados y su categoría de peligro (fundamentalmente ácidos minerales, álcalis, solventes orgánicos y oxidantes fuertes), así como se evaluaron los riesgos químico-físicos y las medidas laborales de seguridad, incluido el tratamiento de los residuos antes de ser eliminados. Se observó que los analistas están expuestos a fuentes de calor y vapores de solventes y ácidos a través de la piel y el sistema respiratorio, pero en un trienio solo se produjeron 3 accidentes leves y no hubo certificados médicos por enfermedades ocupacionales en este tipo de instalación

A clinical trial to evaluate the chemical risk was carried out at the analysis laboratory of the Industrial Biotechnology Studies Center in the Natural Sciences Faculty at Oriente University. For this purpose, aspects such as the general characteristics of the site and of the 20 established techniques for the analysis of waste waters and agroindustrial residual were identified, (11 of these were applied 200 times a year as average), frequency of the analyses, chemical reagents used and their danger category (fundamentally mineral acids, alkalis, organic solvents and strong oxidizers), as well as the chemical-physical risks and the security working measures were evaluated, including the treatment of residuals before being eliminated. It was observed that the analysts are exposed to sources of heat and steam of solvents and acids through the skin and the respiratory system, but just 3 mild accidents took place in a triennium, and there were no medical certifications due to occupational diseases in this type of facility

Riesgo químico en el Laboratorio de Análisis del Centro de Estudios de Biotecnología Industrial / Chemical risk in the analysis laboratory of the Industrial Biotechnology Studies Center

Se llevó a cabo un ensayo clínico para evaluar el riesgo químico en el laboratorio de análisis del Centro de Estudios de Biotecnología Industrial de la Facultad de Ciencias Naturales de la Universidad de Oriente, con vista a lo cual se identificaron, entre otros aspectos, las características generales del local y de las 20 técnicas establecidas para el análisis de aguas residuales y residuales agroindustriales (11 de estas se aplican 200 veces al año como promedio), frecuencia de los análisis, reactivos químicos empleados y su categoría de peligro (fundamentalmente ácidos minerales, álcalis, solventes orgánicos y oxidantes fuertes), así como se evaluaron los riesgos químico-físicos y las medidas laborales de seguridad, incluido el tratamiento de los residuos antes de ser eliminados. Se observó que los analistas están expuestos a fuentes de calor y vapores de solventes y ácidos a través de la piel y el sistema respiratorio, pero en un trienio solo se produjeron 3 accidentes leves y no hubo certificados médicos por enfermedades ocupacionales en este tipo de instalación(AU)

A clinical trial to evaluate the chemical risk was carried out at the analysis laboratory of the Industrial Biotechnology Studies Center in the Natural Sciences Faculty at Oriente University. For this purpose, aspects such as the general characteristics of the site and of the 20 established techniques for the analysis of waste waters and agroindustrial residual were identified, (11 of these were applied 200 times a year as average), frequency of the analyses, chemical reagents used and their danger category (fundamentally mineral acids, alkalis, organic solvents and strong oxidizers), as well as the chemical-physical risks and the security working measures were evaluated, including the treatment of residuals before being eliminated. It was observed that the analysts are exposed to sources of heat and steam of solvents and acids through the skin and the respiratory system, but just 3 mild accidents took place in a triennium, and there were no medical certifications due to occupational diseases in this type of facility(AU)

Biosorption of chromium, copper, manganese and zinc by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum.

The study describes the sorption of Cr, Cu, Mn and Zn by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum and heavy metals. The concentrations studied were 50, 49, 60 and 70 (mg L(-1)) for Cr, Cu, Mn and Zn, respectively. The solution pH and ionic strength were very important factors in the metal biosorption performance and the biosorption capacity of P. aeruginosa AT18 for Cr3+,Cu2+, Mn2+ and Zn2+. In aqueous solution, the biosorption increased with increasing pH in the range 5.46-7.72. The results obtained in the experimental assays show that P. aeruginosa AT18 has the capacity for biosorption of the metallic ions Cr3+, Cu2+ and Zn2+ in solutions, although its capacity for the sorption of manganese is low (22.39 mg Mn2+/g of biomass) in comparison to the Cr3+, Cu2+ and Zn2+ ions, as shown by the individual analyses. However, 20% of the manganese was removed from an initial concentration of 49.0 mg L(-1), with a Qm value similar to that obtained in solutions containing mixtures of Cr3+, Cu2+, Mn2+and Zn2+. The chromium level sorbed by P. aeruginosa AT18 biomass was higher than that for Cu, Mn and Zn, with 100% removal in the pH range 7.00-7.72 and a Qm of 121.90-200.00 mg of Cr3+/g of biomass. The removal of Cr, Cu and Zn is also a result of precipitation processes.